French Cleat Wall System — Woodworking Plan — finished build photo

French Cleat Wall System — Woodworking Plan

$11.99 $14.99
Skip to product information
French Cleat Wall System — Woodworking Plan — finished build photo
  • French Cleat Wall System — Woodworking Plan — finished build photo
  • French cleat wall with tools hanging in a garage
  • French cleat wall up close — shelf, drill holder, parts bin and tool rack
  • French Cleat Wall System — Woodworking Plan — in-use photo
  • French Cleat Wall System — Woodworking Plan — plan cover page
  • French Cleat Wall System — Woodworking Plan — sheet layout page
  • French Cleat Wall System — Woodworking Plan — assembly steps page
  • French Cleat Wall System — Woodworking Plan — cut list page
French Cleat Wall System — Woodworking Plan

French Cleat Wall System — Woodworking Plan

$11.99 $14.99

Digital product • One-time purchase • No physical shipping

Hook

One 4×8 sheet turns a blank wall into a tool wall you can rearrange forever. Four wall cleats, four starter holders — shelf, drill block, parts bin, hand-tool rack — and every holder hangs on any cleat line, anywhere. The 45° rip is explained once and used everywhere: set the blade once, cut every cleat in the system.

Specs

  • Finished size: 48 × 48 in starter wall section (projects 11 in with holders fitted)
  • Plan length: 18 pages (US Letter), imperial + metric throughout
  • Wall cleats: 3 in strips with one long edge beveled at 45°, at 15 in spacing — the four cleats span the 48 in section exactly, edge to edge
  • Holders included: 24 in shelf on 2 brackets · drill holder block · parts bin · hand-tool rack — each with its mating cleat placed exactly over a wall cleat
  • Sheet goods: 1 × ¾ in plywood sheet
  • Estimated material cost (computed by the plan engine): $84
  • Difficulty: Beginner · Build time: 1 day

    • What's included

  • 18-page plan (Letter, print or tablet) — imperial & metric throughout
  • Front, side & top elevations + a full exploded view, all dimensioned in inches and millimetres
  • The 45 degree rip explained once, used everywhere: one setting cuts every cleat
  • Four starter holders drawn to size — shelf, drill holder, parts bin, tool rack
  • DXF + SVG cutting files, grouped by real material thickness
  • Exact hardware list — screw specs included, no guesswork

    • Tools

  • Table saw or circular saw with a tilting blade — the 45 degree rip is the one angled cut
  • Drill/driver and a stud finder
  • Forstner bits 1 in and 1-3/4 in (drill holder)
  • Level (the longest you own), clamps, combination square

    • FAQ

    Is this a physical product? No — it's an instant digital download: the plan PDF plus DXF and SVG cutting files.

    Why 15 in cleat spacing? So the four wall cleats span the 48 in section exactly, edge to edge, with no partial bay at the end. The spacing is stated consistently everywhere in the plan.

    Can I extend the wall? Yes — the system is one repeated cleat. Add sections side by side and keep ripping cleats at the same blade setting.

    Do the holders only fit in one place? No — interchangeability is the point. Every holder's mating cleat lands on any wall cleat line.

    What if the files don't open or arrive damaged? Files faulty or corrupted? Free replacement within 7 days.

    IN SITU

    Drawn flat. Lives in 3D.

    French cleat wall with tools hanging in a garage
    THE BUILD, IN ITS ROOM
    French cleat wall up close — shelf, drill holder, parts bin and tool rack
    THE BUILD, IN ITS ROOM — ANGLE 02
    French Cleat Wall System — Woodworking Plan — sheet layout page
    ITS SHEET LAYOUT — FROM THE PLAN

    Same dimensions in the scene, on the layout and in the book — checked against each other before this page shipped.

    KEEP BUILDING

    Other sheets from the same shop.

    All plans →